Horizontal Manual Lathe Machine CA6140 CA6240 Taxanaha
Astaamaha
1.Habka hagaha iyo dhammaan gearsyada ku jira kaydka madaxa ayaa adag oo saxan dhulka.
2.Nidaamka lafdhabarta ayaa ah qallafsanaan sare iyo saxsanaan.
3.Mashiinada waxay leeyihiin tareen qalab madax adag oo awood leh, saxnaanta wareega sare iyo socodka siman oo leh buuq yar.
4.Aalad badbaado oo xad dhaaf ah ayaa lagu bixiyaa duleelka.
5.Badarka ama qalabka korantada ee braking.
6. Shahaadada tijaabada dulqaadka, shaxda socodka tijaabada ayaa lagu daray
Tilmaamaha
| MOODEL | CA6140 | CA6240 | ||
| CA6140B | CA6240B | |||
| Max .Sariirta korkeeda ku lulaya | 400mm | |||
| Max .Ku lulaya gaadhiga | 210mm | |||
| Max .Swing in farqiga | —— | 630mm | ||
| Dhererka farqiga waxtarka leh | —— | 210mm | ||
| Max .dhererka gabal shaqo | 750/1000/1500/2000/2200/3000mm | |||
| Ballaca sariirta | 400mm | |||
| Qaybta rogista | 25×25mm | |||
| Spinal | Xawaaraha lafdhabarta | 10-1400rpm/16-1400rpm(24 talaabo) | ||
| Daloolin dhexda dunta | 52mm (Taxane ah) 80mm (taxane B) | |||
| Spindle taper | No.6 (MT6) (Φ90 1:20)[Φ113:20] | |||
| Quudinta | Tirada quudinta | (64 nooc) (mid kasta) | ||
| Kala duwanaanshaha xargaha metric | (1-192mm) (44 nooc) | |||
| Inta u dhaxaysa dunta inch | (1-24tpi) (21 nooc) | |||
| Kala duwanaanshaha mawduucyada moduleka | 0.25-48 (Module 39 nooc) | |||
| Kala duwanaanshaha xadhkaha dhexroorka | 1-96DP (37 nooc) | |||
| Dabada | Max.safarka dunta dabada | 150mm | ||
| Dhexroor duntustock | 75mm | |||
| Taper ee daloolka dunta dunta dabada | NO.5 (MT5) | |||
| Matoorka ugu muhiimsan | 7.5KW (10HP) | |||
| Baakad | 750mm | 2440×1140×1750 | ||
| (L×W×H mm) | 1000mm | 2650×1140×1750 | ||
| 1500mm | 3150×1140×1750 | |||
| 2000mm | 3650×1140×1750 | |||
| 2200mm | 4030×1140×1750 | |||
| 3000mm | 4800×1140×1750 | |||
| Miisaanka (kg) | Dhererka | GW NW | ||
| 750mm | 2100 1990 | |||
| 1000mm | 2190 2070 | |||
| 1500mm | 2350 2220 | |||
| 2000mm | 2720 2570 | |||
| 2200mm | 2800 2600 | |||
| 3000mm | 3300 3200 | |||
