Mashiinka Lathe Horizontal CQ6280
Astaamaha
Cag dhan ama kala sooc waxay u taagan tahay ikhtiyaari
11KW (15HP) matoorka ugu weyn ee ikhtiyaari ah
Lathe-gani waxa uu leeyahay faa'iidooyinka xawaaraha wareega sare, daloolka dunta dunta, qaylada hoose, muuqaalka quruxda badan, iyo hawlo dhamaystiran.Waxay leedahay qallafsanaan wanaagsan, saxnaansho sare oo wareeg ah, dalool sare oo dunta dunta, waxayna ku habboon tahay goynta xooggan.Waxay si toos ah u rogi kartaa metric iyo threads Imperial ， Qalabka mashiinkani wuxuu kaloo leeyahay codsiyo badan oo kala duwan, hawlgal dabacsan oo ku habboon, kontoroolka dhexe ee nidaamka qalliinka, badbaadada iyo isku halaynta, dhaqdhaqaaqa degdega ah ee sanduuqa slide iyo saxanka slide dhexe, iyo kursiga dabada rar qalab samaynta dhaqdhaqaaqa aad u badbaadiyey shaqada.Qalabkan mishiinku waxa uu ku qalabaysan yahay wax lagu dhejiyo, kaas oo si fudud u rogi kara koonaha.Habka joogsiga isku dhaca ayaa si wax ku ool ah u xakameyn kara astaamo badan sida dhererka leexashada.
| Qalabka caadiga ah: | Qalabka Ikhtiyaarka ah |
| 3 daaman Sleeve iyo xarunta Qoriga saliidda | 4 daanka chuck abd adapter Nasasho joogto ah Raac nasashada saxan wadista Saxan wajiga Iftiin shaqo Nidaamka bareegga cagaha Nidaamka qaboojinta |
Tilmaamaha
| QALABKA MAKIINADA | CQ6280 |
| AWOODDA | |
| Lulid Dusha Islaaydh | Φ800mm |
| Lulida Iskutallaabta | Φ570mm |
| Lulida dhexroorka farqiga | Φ1035mm |
| Dhererka Farqiga | 250mm |
| Fogaanta u dhaxaysa Xarumaha | 1500mm/2000mm/3000mm |
| Ballaca Sariirta | 400mm |
| Max.Qaybta Qalabka | 25mm × 25mm |
| Max.Socdaalka Cross Slide | 420mm |
| Max.Safarka Nasashada Isku-dhafka | 230mm |
| MADAXA MADAXA | |
| Spindle Bore | Φ105mm |
| Spinal Sanka | D1-8 |
| Taper of Spindle Bore | Φ113mm (1:20)/MT5 |
| Lambarka Xawaaraha Spindle-ka | 16 |
| Xaddiga Xawaaraha Spindle-ka | 25 ilaa 1600 rpm |
| QUUDINTA IYO SHARCIGA | |
| Pitch Leadscrew | Φ40mm×2T.PI ama Φ40mm×12mm |
| Xadhkaha Inch Range | 7/16 ~ 80T.PI (54 nooc) |
| Xaddiga cabbirka | 0.45 ~ 120mm (54 nooc) |
| Kala duwanaanshaha Dheecaannada Dhexroorka ah | 7/8 ~ 160DP (42 nooc) |
| Module Pitches Range | 0.25 ~ 60MP (46 nooc) |
| Kala duwanaanshaha Quudinta Dhaadheer ee Ledhka Metric | 0.044 ~ 1.48mm/rev (25 nooc) |
| Qiyaasta Quudinta Dhaadheer ee Lead inch | 0.00165"～0.05497"/rev (25 nooc) |
| Kala duwanaanta Quudinta Isku-tallaabta ee Wareegga Ledhka Metric | 0.022 ~ 0.74mm/rev (25 nooc) |
| Kala duwanaanta Quudinta Iskutallaabta ee Inj Lead Screw | 0.00083"～0.02774"/rev (25 nooc) |
| TAILTOCK | |
| Safarka Qull | 235mm |
| Dhexroor kabid | Φ90mm |
| Taper | MT5 |
| MOTOR | |
| Awoodda dhaqdhaqaaqa ugu weyn | 7.5kW (10HP) |
| Awoodda bamka qaboojiyaha | 0.09kW (1/8HP) |
| Miisaanka iyo Miisaanka | |
| Cabirka Guud (L×W×H) | 321/371/471cm×123cm×167cm |
| Cabbirka Xidhmada (L×W×H) | 324/374/474cm×114cm×191cm |
| Miisaanka saafiga ah | 3220/3505/3870kg |
| Miisaanka guud | 3705/4005/4480kg |
